Wi-Fi Smart Switch (SW3)

Parameters

Connection diagram

Install the "Gosund" App

1. Search for the Gosund app on the App Store / Google Play Store, or just scan the QR code on the package to download it. (On iPhone you can use the built-in camera to scan the QR code; on Android you may need a barcode scanner. Please confirm the app before downloading.)
2. Register an account and memorize the password: enter your email address or phone number, then obtain a verification code to complete the registration.

Indicator Light Status

• Blue light blinks every 0.5 second: Easy Mode connection
• Blue light blinks every 2 seconds: AP Mode connection
• Red light: power is ON
• No light: power is OFF

Add the device (Easy Mode)

For an Easy Mode connection, the blue indicator light blinks rapidly (twice a second).

1. Confirm that the smart switch is well installed.
2. Open the Gosund app and choose "Socket".
3. Confirm the light status on your switch and follow the app's guide. (If you don't see the blue light blinking quickly, press the On/Off button to reset.)
4. Set a unique name for this smart switch and choose its room location.

Add the device (AP Mode)

If the indicator light blinks once every 2 seconds (the Easy Mode connection failed), remove and re-install the smart switch into your power outlet. When you make sure the indicator light is blinking quickly again for Easy Mode, hold the power button for about 7 seconds to switch to AP Mode.

Once you see the indicator light blink slowly (every 2 seconds), you can start the AP Mode connection:

1. Go back to the Add Device "+" interface and choose AP Mode in the upper right corner.
2. Long press the on/off button until the indicator light flashes slowly, then confirm it in the app.
3. Choose your 2.4G Wi-Fi and enter the password, then confirm it in the app.
4. Tap "Connect now" and choose the Wi-Fi hotspot named "SmartLife-xxx", then go back to the Gosund application.
5. Wait until the configuration succeeds and then tap "Completed".

Connect with your cellphone

Requirements: a 2.4GHz Wi-Fi connection at home.

• If you only have a 5GHz Wi-Fi router, you will not be able to complete the connection.
• Default 2.4G Wi-Fi names look like: Gosund_xxxx_2.4G, Gosund_xxxx_5G, Gosmart_xxxx, Gosmart_xxxx_5G.
• If you are using a dual-band Wi-Fi router that broadcasts 2 Wi-Fi signals, make sure your phone is connected to the 2.4GHz Wi-Fi signal (usually the one without the "_5G" suffix).
• If you are using a dual-band Wi-Fi router that broadcasts only 1 Wi-Fi signal, you'll have to manage your Wi-Fi router and change the settings to enable a 2.4GHz Wi-Fi.

Getting to know the Gosund App

In the app you can see your devices (for example, "bedroom light — Socket is on"). You can edit the default names in this interface for better management.

Create Scenes / Groups

You can create certain scenes and groups in the Gosund App. It allows you to control different smart devices in different rooms at the same time.

How to connect with Amazon Alexa

Requirements

1. An Amazon Alexa device and the Alexa App.
2. The smart switch connected with the Gosund App.
3. Your Gosund App user ID and password.

Add Gosund as a "Skill" for Alexa

Open the Alexa app and choose Skills & Games → search for Gosund → ENABLE TO USE → enter the Gosund account → Authorize to use → choose Gosund. The devices you added will then sync to the Alexa App. You can also ask Alexa to discover new devices at this moment.

How to ask Alexa to turn on/off the smart switch

First you need to set an exact name for the switch in the Gosund app. If not, Alexa may tell you: "Sorry, I can't find the device named xxx." You can say to Alexa, "Alexa, turn on/off bathroom plug." This command will help you to do the work.

How to connect with Google Home

After you have connected the smart switches with the Gosund app, link them to the Google Home app. Open the Google Home app and find "Set up device" → "Works with Google" → search Gosund → enter your Gosund account → Authorize to use. Then click the device that is "Linked to you" (or open "Works with Google" again) to manage your linked devices, and follow the steps to set up the device — give it a name and assign a home or a room.

Device Sharing

If you want to give others permission to control your smart switch, you can authorize that with the device sharing function. Go to the Gosund app → choose the device you want to share → choose the Edit Button → choose shared devices → Add sharing → enter his/her Gosund account → search and complete.

Troubleshooting

Q: Do I need to set up the device again if I changed my router?

A: Yes! You must set up the smart switch again if there is any change to the current Wi-Fi status — either you changed your router or you moved the device to a new house. However, you don't need to worry if you are just moving it inside your room with the same Wi-Fi.

Q: Why did my phone connection fail?

A: You should try both Easy Mode and AP Mode. Read the pairing steps again, make sure to follow the guide, and try again.

Q: Why can't I voice control it with my Alexa/Google?

A: Make sure you set up the smart switch successfully in the Gosund app and that it is working fine. Make sure you used the correct account when you linked Gosund as a skill on the Alexa/Google App. Make sure your Alexa/Google device is working fine, and that the device name you set is non-repetitive and recognizable for the voice assistant.

Q: Why does it turn on/off or come offline unexpectedly?

A: Check your Wi-Fi status and make sure the electricity is fine. Check whether you've set a timer for it. If everything looks alright, just reset the smart switch in your app again and see what happens. Email the after-sales service if this problem still exists.

Safety Information

This device is for indoor and dry conditions only. Make sure the switch's electricity rating is correct for the appliances you intend to use with it. Do not try to disassemble this device by yourself — be aware of the risk of product damage and safety hazards. Keep it away from heat, humidity and other extreme environments. This device meets the UL94 V-0 flammability standard.

Warranty

This smart switch is covered by a limited warranty from Gosund for the original purchaser that covers the product against defects in workmanship and materials for 24 months from the date of purchase (damage through normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than the authorized service center, or acts of God are not included). During the warranty period and upon verification of defects, this product will be replaced when returned with proper proof of purchase.

Contact Us

For any inquiries or comments concerning our products, please send an email to [email protected].

• Manufacturer: Shenzhen Gosund Technology Co., Ltd.
• Website: www.gosund.com
• Email Support: [email protected]

---

Need help adding the switch to the app? See How to add a device.